This product is manufactured in the USA by UUC.
NEW!
Lightweight tubular design has the same functionality as our solid
swaybars but saves approximately 15lbs of weight.
Front and rear bars are available separately - special
discounted pricing when you buy both.
Suitable for 335i,
330i, 328i,
325i models (2WD only)
Now you can have the
same swaybar technology used in the official BMW 335d
racecars! UUC is proud to have been the manufacturer of
swaybars for the 335d racecars campaigned by BMW USA.
What's
a Sway Bar?
An anti-sway bar is a
suspension component designed to reduce body
roll. It
keeps your vehicle flatter in the turns by transferring the pressure
exerted on
the outboard wheels and applying opposite pressure on the inboard
wheels. In
this way weight is more evenly applied to all four wheels, helping the
vehicle
stay more level with the road.
Technical details
As an example of our
attention to detail, the E90 3-series Sway
Barbarians is a
very unique set of bars. Features include:
- Revised contouring for maximum clearance even with extremely lowered
cars.
- Precision-cut adjustable ends.
- Urethane bushings and lubrication included.
Sizes
|
TUBULAR DIAMETER |
SOLID EQUIVALENT |
| FRONT |
32mm |
27mm |
| REAR |
19mm |
23.8mm |
Superior Materials
We put our bars through
this extensive process to insure that
the final
product will be the strongest, most durable bar on the market, and that
it will
be the most resistant to form alteration.
Adjustability
Our rear E90 Xi
swaybar uses a multi-hole system on the rear bars which
allows for fine tuning of the bar for whatever desired effect, without
sacrificing body roll.
Front Bar: non-adjustable
Rear Bar: 2 hole adjustment
Positive-placement rear
bushing stops
To keep the
tight-tolerance rear bar from shifting
side-to-side, they are
fitted with postiive-placement stops, rings around the bar that hold
the bar in
place against the bushings.
Powdercoated Finish
After the bars are CNC
mandrel bent and the ends are forged
and punched, a
silver powdercoat is applied for a smooth, long lasting finish in a
similar
process to how factory bars are coated. This smooth finish allows the
bars, when
properly installed with polyurethane bushings and grease, for long term
performance with minimal maintenance.
Polyurethane Bushings and
steel brackets
The SwayBarbarians include
replacement polyurethane bushings
which are built to "aircraft spec" (literally - our urethane
fabrication facility uses the same material and production guidelines
as they do
for Boeing). This results in a durable bushing that will not
disintegrate and
has longer re-lubrication intervals for long lasting, quiet results. Be
sure to use generous amounts of grease to ensure maximum performance
from your
SwayBarbarians!
Steel brackets are included which replace the weaker original equipment
aluminum brackets.
