This kit is designed to strengthen the rear subframe mounting attachment points in the floorpan of the chassis. As these points weaken from the normal stress of driving, the sheetmetal in the floor cracks and eventually rips. Strengthening of this area is critical not only for safe operation in a street car, but also for optimum performance in a track or race car.
Parts list for kit:
1. Two 12mm x 1.5 bolts
2. Two front subframe mounting point Reinforcements
3. One Right rear subframe mounting point Reinforcement
4. One Left rear subframe mounting point Reinforcement
5. Two cross member spacers
6. Two trunk block off plates
Recommended tools:
automotive lift
welding equipment
cutting/grinding wheel
basic hand tools
primer and/or rust converter paint
seam sealer
Approximate installation time: 6 hours
IMPORTANT NOTES:
1. The entire exhaust, rear suspension, and subframe must be removed for installation.
2. Requires welding – it is very important to disconnect the battery and DME (computer) before welding. All grounding must be directly to the chassis.
3. Professional installation strongly recommended.
There are currently no reviews of this
product.
Submit a Review
